Morro Data devices use the following outbound ports:


PortServiceRequiredPurpose
443 (TCP)HTTPSYesUsed to communicate with the Morro Cloud server and Cloud Storage and Services Providers, like Wasabi and Amazon S3.  Also required for proxy support (experimental).
123 (UDP)NTPYesNetwork Time Protocol server for time synchronization. Only needed if NTP server returned from DHCP is external. 
22 (TCP)SSHNoSecure Shell access to the device for support.  See additional notes below.
389 (UDP+TCP)LDAPNoRequired for LDAP authentication support.
636 (UDP+TCP)
LDAPNoRequired for LDAP over SSL authentication support.
53 (UDP+TCP)
DNSYes
Not required if DNS server is internal.


When opening a port for SSH access, set the source IP to the IP address of the CacheDrive.  Destination can be set to "Any", but for additional security, use the value "techsupport.morrossystem.com".


Please also reference below for the outbound connections needed for the Morro Data services:

https://support.morrodata.com/a/solutions/articles/14000134385?lang=en